A welding helmet is one of the most important pieces of personal protective equipment a welder can have. A good helmet protects the eyes and skin not only from severe sparks but also from potentially vision-damaging ultraviolet and infrared rays emitted by the arc. As one of the most visible pieces of safety attire, a welding helmet also gives wearers an opportunity to add a bit of personal flair to their welding gear. With this is mind, welding helmets today are available in a wide range of colours. These visual features obviously command attention, but a helmet's protective features, combined with comfort considerations are what welders should consider when selecting the right helmet for their needs. If you have yet to use an auto darkening welding mask the Livivo Helmet entry level is a low priced helmet is a perfect opportunity to join the masses. The Livivo helmet costs less than most traditional/passive welding helmets so don't miss out on the most competitively priced auto mask available in the UK.
Light State: DIN4, Dark State: DIN9-13, Switching time: 1/25, 000S at room temperature, Operation temperature: - 5°C (23°F) - +55°F (131°F), Delay time: 0.2S ~ 0.8S, Sensitivity: Stepless Adjusted, Grind: Yes, Battery: Li-Mi & Solar Combination, Min. Lifetime: 5,000 Welding hours, Viewing Area: 92 x 42mm (3-3/5" x 1-7/11"), Cartridge Size: 110 x 90 x 10mm, Shape Adjustment: Outside & Stepless, Sensors: 2, UV & IR Protection: Up to shade DIN16