Installation
1.Take the mount apart by un-screwing the Phillips screw and the mount will apart.
Then you will see the 2 half's of the insert ring.
2.Place the 2 insert half's of the icsert ring around the handlebars.
3.1 inch insert ring on handlebar.
4.And then wrap the steel mount around them with the swing hinge part of the mount in the flat spot of the ring and position the mount exactly where you want it to be on your handlebar.
5.Then put the screw back into the mount hole ang put the backing nut on it and tighten it up so the mount will not move.Next is mounting the unit onto the mount.
6.Look at the unit