Yvelines Wireless Doorbells Bring You More Functions!
Easy to Set Up -Use the double-sided adhesive tape to stick the transmitter to the wall; Or install it with screws, small tools are included.
Memory Function -With the memory function, you don't need to reset your previous selected melody and volume level after a power failure, so convenient!
Digital Code System -When the bell button is pressed, a radio signal is sent to the receiver. Different codes on the same frequency will avoid a possible interference from your neighbors' facility.
Night Light Function -Long press medium button for 5-10 seconds, open or close noctilucence mode, provide you with a quite and comfortable atmosphere.
Safer with Certificate -Remote transmitter button is rated IP55, weatherproof, dust proof and acceptable for outdoor use. Receivers can be easily plug into outlets (no batteries required). CE, ROHS, FCC, PSE, TELEC Certificate.
Installation of Transmitter with Screws
1.Drill holes on the wall and put the plastic screw caps in.
2.Screw open the two reserved holes on the back of transmitter, it may take some strength.
3.Drill the screws to the plastic screw caps.
Technical Specification
Working Voltage of Plug-in Receiver: 110-260VBattery in Transmitter: 12V 23A Alkaline BatteryWorking Temperature: -30 to 70/ -22to 158
Package Include
1 x transmitter push button
2 x receiver
1 x alkaline battery built-in transmitter
1 x manual
1 set small tools -2 screws, 2 anchors, 1 screwdriver, 1 double-sided adhesive tape
After Sales Service
Any problem, please feel free to contact us by yvelines-eu@outlook.com