UK

ForU-1 PC Tester ATX Power Supply 20 / 24 Pin Computer Measuring Diagnostic Tester

LCD PC Supply Tester ATX Power Supply 20/24 Pin Computer Measuring Diagnostic Tester

Specifications:

Voltage input: 20/40PIN (ATX power supply)

Voltage detection: +12V -12V +5V +3.3V 5VSB 12VPG

Connection port: Floppy HDD COROM SATA 4Pin (P4) 8pin (Dual-CPU) 6pin (PCI-E)

Weight: approx.125g

Case material: aluminum alloy

Color: Gold

Packaging: neutral plastic packaging

Operation Manual:

1. Insert the unloaded power supply 20Pin or 24Pin plug into the corresponding position of the power tester. Turn on the power, and "drop" sound two times startup sound, if these were not numerical flicker and alarm, said the power output of the power supply is normal. The corresponding voltage or PG value is shown as a scintillation alarm state, indicating that the power supply is a fault power.

(Note: if you plug in the 20Pin or 24Pin interface tester screen (+12V2), and display LL, it is shown that LL is used for testing 4P or 6P/8P. If it is not inserted, it can be ignored. Or put in one of the groups. Please recognize that 4P must be inserted in the 4P position)

2. Other large 4P (HDD interface), small 4P (floppy drive interface), 4P/8P (CPU interface), 6P (graphics card interface), SATA interface, which need to be inserted when testing. It can be unplugged without testing.

3. Insert a large 4P (HDD interface), small 4P (floppy drive interface), +12V and +5V on the left of the tester, indicator light is bright(if the light is not bright, indicating the line fault of this group).

4. Insert the 4P/8P (CPU interface), and the 6P (graphics card interface) the tester screen (+12V2) displays the test voltage (if there is a fault that will flicker the alarm).

5. Insert the SATA interface tester on the left +12V and +5V and +3.3V to display the light. (if the light is not bright

Latest products for Price Comparison

Further categories