Welcome to the world of 3D Mars for endless opportunities of innovation and design in 3D printing!
3D MARS specialize in providing value-for-money 3d printing filament to most 3d printing lover. Our filament is 1.2KG which meet most 3d printer owners' need. And PLA(Poly Lactic Acid) is a safe green material, best for the printing of toys, model and small household items.
Hope that our filaments can enrich your experience in 3d printing industry.
1.36KG (approximately 2.99 lbs/ 390 meters) Spool
PLA (Poly lactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
Spool Diameter: 7.87" - Spool Width: 2.56" - Spool Hub Hole Diameter: 2.16"
Density: 1.24g ± 0.05g/cm³
Tensile Strength: 48.5 MPa
Bending Strength: 82.7 MPa
Notch Impack Strength: 16 j/m
Melting Point: 150°C - 165°C
Printing Temperature: 195°C - 220°C (383°F - 428°F)
Frequently Asked Questions
Filaments do not extrude properly
A: Check the running extruder temperature is match with the temperature of the filament extrusion needed. If not, keep trying to set a appropriate temperature.
How do I store my filament
A: Sealing the filament in a dry storage can effectively prevent it brittle and crack cased by absorbing moisture from the air for a long term.
Is your filament tangled
A: Check the spool is installed correctly.
- For good shape, please keep your PLA filament away from the things exceeding 60 degrees.
- Had better not use it to making thin things or impact the product made by pla because it is frail.