UK
KINGPRINT SKR V1.3 Smoothieware 32bit Controller Board for 3D Printer Compatible with 12864LCD / Support A4988 / 8825 / TMC2208 / TMC2100 Driver (SKR V1.3)
by KINGPRINTNew from:
£22.99
Shipping:
see website
Prices may incl. VAT *
Last refresh Jun/12/2019 12:13 PM
Last refresh Jun/12/2019 12:13 PM
or
or
Brand
KINGPRINT
SKR Motherboard Features:
1.The performance of the ARM-class LPC1768 master chip of the Cortex-M3 series with 32-bit main frequency and 100 MHz is greatly improved; , integrated development environment for Visual Studio Code: support of online debugging, helpful for product development and performance optimization, use of C languages, low development call;
2.The layout of the circuit board is strict and beautiful and specializing in heat dissipation optimization 3.Use a dedicated power chip to support the 12-24V power supply;
4.It can accept 24V input and can reduce the warm bed current to 1/4 under the Reduce same power, thereby effectively solving the current heating problem of the hot bed MOS tube;
5.Support 2.8-inch, 3.5-inch color touch screen, LCD2004 screen support, LCD12864 screen;
6.The system supports Simplified Chinese, English and other languages can be switched by itself;
7.Update the firmware via SD card, the operator The setup is simple and convenient;
8. Using a Plug-In Fuse Facilitates Replacement
9.The special function interface uses a distinctive pin header to significantly reduce the wiring error rate.
SKR Motherboard Parameters:
Appearance: 110 * 85mm
Installation Size: 102 * 76mm
Microprocessor: ARM Cortex-M3 CPU
Input Voltage: DC12V-DC24V 5A -15A
Motor Driver: Support for TMC2208, TMC2130, ST820, LV8729, DRV8825, A4988, etc. can be externally connected to the motor drive. Drive Mode Support: TMC2130SPI, TMC2208UART
NOTE: If you need more methods and materials, and how to change the firmware and get the firmware
1.The performance of the ARM-class LPC1768 master chip of the Cortex-M3 series with 32-bit main frequency and 100 MHz is greatly improved; , integrated development environment for Visual Studio Code: support of online debugging, helpful for product development and performance optimization, use of C languages, low development call;
2.The layout of the circuit board is strict and beautiful and specializing in heat dissipation optimization 3.Use a dedicated power chip to support the 12-24V power supply;
4.It can accept 24V input and can reduce the warm bed current to 1/4 under the Reduce same power, thereby effectively solving the current heating problem of the hot bed MOS tube;
5.Support 2.8-inch, 3.5-inch color touch screen, LCD2004 screen support, LCD12864 screen;
6.The system supports Simplified Chinese, English and other languages can be switched by itself;
7.Update the firmware via SD card, the operator The setup is simple and convenient;
8. Using a Plug-In Fuse Facilitates Replacement
9.The special function interface uses a distinctive pin header to significantly reduce the wiring error rate.
SKR Motherboard Parameters:
Appearance: 110 * 85mm
Installation Size: 102 * 76mm
Microprocessor: ARM Cortex-M3 CPU
Input Voltage: DC12V-DC24V 5A -15A
Motor Driver: Support for TMC2208, TMC2130, ST820, LV8729, DRV8825, A4988, etc. can be externally connected to the motor drive. Drive Mode Support: TMC2130SPI, TMC2208UART
NOTE: If you need more methods and materials, and how to change the firmware and get the firmware
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.