Faster and more accurate: Usongshine stepper motor has increased the total speed of high torque by 15% to 25% compared to conventional motors. We have upgraded PCB inside the motor...
3DLAC is a spray adhesive for the building plate. The spray adhesive has been developed by a Spanish laboratory specifically for 3D printers using FDM methods. 3DLAC is without perfume, high-temperature resistant...
Compatibility: The stepper motor 42-40 is for Eixe of the Ender and CR-10 series (e.g. Ender-3 / Ender 3 Pro / CR 10 / CR 10S etc.). 1.8 degree step angle, 0.4 N.M holding...
INNOVATIVE TECHNOLOGY The unique combination of white light technology and the laser triangulation allow the SOL 3D scanner to reach a resolution of 0.1 mm with texture feature. The camera picks...
Dimensional Tolerance ±0.02mm: 3D printer filaments are produced with more precise specifications and have a tolerance of only +/- 0.02 mm. Perfect roundness and very tight diameter tolerance, approximately 330 m of...
Bowden extrusion are supported:It comes with a nema stepper motor mount,works great on TEVO Tarantula i3,Anycubic Kossel i3 Mega,Flsun i3,MP Select and other bowden extrusion 3d printers as well. Direct extrusion...
Features: 2 phase, 1.8 degree step angle, 3.0Nm holding torque, 4.0A-5.0A Rated Current, 4-wire, 24-50VDC operating voltage(Recommend 48VDC) Advantage: The stepping motor is featuring low vibration, low noise, low heating, high...
Works Well on Most 3D PrintersGiving the outstanding performances, ANYCUBIC 3d printer standard resin is suitable for most DLP or LCD 3D printers, such as ANYCUBIC PHOTON / PHOTON S, MONO,...
Dimensional Tolerance ±0.02mm: 3D printer filaments are produced with more precise specifications and have a tolerance of only +/- 0.02 mm. Perfect roundness and very tight diameter tolerance, approximately 330 m of...
High quality PLA filament: 1.75 mm diameter - 500 g Easy to print at low temperatures: ca. 195-215 ° C Filament on reel in shrink film including 1 bag of silica gel, packed in...
1.Print Temperature Range: 190-220. 2.High Dimensional Accuracy: 1.75mm, tolerance +/-0.03mm. 3.High Quality: No bubble or dust inside, neatly rolled to reduce clog or tangling, with strong layer adhesion. 4.Vacuumed Sealed...
High-Performance & Durable and Reliability; An Ideal Platform Heated Bed for 3D Printing. Incorporated with warmed bed: Super Flatness, Fast and uniform warming. Simple to clean by liquor/water. The glass heatbed...
1.Print Temperature Range: 190-220. 2.High Dimensional Accuracy: 1.75mm, tolerance +/-0.03mm. 3.High Quality: No bubble or dust inside, neatly rolled to reduce clog or tangling, with strong layer adhesion. 4.Vacuumed Sealed...
This is the most popular Nema 17 model. It with 1.8 deg. step angle (200 steps/revolution). Each phase draws current 0.4A at 12V, allowing for a holding torque of 26Ncm(36.8oz.in). 26Ncm(36.8oz.in)...
Shiny Silk PLA Smooth and shiny finish like real silk, no extra polishing needed, printing at a high detail results in a beautiful finish. SUNLU high quality silk PLA filament brings arts...
Specially designed for Ender 3 / 3X / 3 Pro, Ender 5, CR-20 with the hotbed plate size of 235 x 235mm. The A plate is flexible and magnetic, it is easy to move away from...
Stable Printing with Creality Ender 3 3D PrinterEnder 3 adopts patented technology and V-Slot+precision pulley, which effectively reduces noise and make it running more smoothly and more wear-resistant. MK8 Technology used in...
Advanced performance - Nema 17 stepper motor with current 1.7A, 1.8 deg, 200 steps/revolution, low self-inductance reactance, responsive and can avoid system error. High torque (40N.cm ), low self-inductance reactance, responsive...
Easy to use. Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line) Support IIC protocol. The I2C LCD1602 library is provided, so...
Rapid Heating BedThe carbon crystal silicon glass plate provides a strong adhesion,so the printing model will not easily become warped, so users can realize quick manual mold taking Resume Printing FunctionThe...
3DLAC solves the problem of adhering certain materials to the printing base. With a slight spray on the surface the piece is attached to the base until the print is completed...
Dual-drive Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385 Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted...
Please re-pin the wires as your demand, for not all machines are wired in the same way,35-35mm nema 14 stepper motor, size 35 * 35 * 34mm Come with with Integrated 50CM...
Features: 2 phase, 1.8 degree step angle, 2.2Nm holding torque, 4.0A Rated Current, 4-wire Advantage: The stepping motor is featuring low vibration, low noise, low heating, high speed Digital Motor: With...
The micro textured surface of 3D Printer sticker can instantly locks to your 3D model quickly. Background is made of 3M adhesive, Once installed and calibrated, and won't have to...
Compatibility: theses heated bed springs are compatible with most 3D printer heating beds, Ender 3, Ender 3 pro hot bed springs, flat top and hard springs Compression springs size: aperture (OD):...
Recommended Extrusion/Nozzle Temperature 190-220, Heat bed 50-60, Print Speed 30-90mm/s Dimensional Accuracy and Consistency, Diameter tolerance at +/-0.03mm, Net weight 1kg (2.2lbs) filament No bubble, Tangle-free, Clog-free. Bright colors Vacuum...
Recommended Extrusion/Nozzle Temperature 190-220, Heat bed 50-60, Print Speed 30-90mm/s Dimensional Accuracy and Consistency, Diameter tolerance at +/-0.03mm, Net weight 1kg (2.2lbs) filament No bubble, Tangle-free, Clog-free Vacuum sealed with...
Environmental protection: Made from starch raw materials derived from renewable plant resources. Vacuum-sealed packaging: GEEETECH 3d filaments are carefully vacuum-packed with desiccant to maintain low humidity. And keep it dry,...
Nema 17 stepper motor with 0.42Nm holding torque Bipolar stepper motor 42*42*38mm, 2 phase With built-in 30cm cable, 4-wire Rated current 1.5A & resistance 2.4ohms, 1.8 degree Low noise high speed 3d...
100% borosilicate glass. Borosilicate glass is rated for higher temperatures than normal sheet glass. Flat, heat resistant plate. Does not warp during long term use.. Conducts heat evenly across the...
Motor driver: 9V-42V DC power supply, H-bridges bipolar constant phase current drive. The maximum 4.0A of the eight types of output current. The largest 32 divisions of the 6 models are...
Shiny Silk PLA Rainbow Color Smooth and shiny finish like real silk, no extra polishing needed, printing at a high detail results in a beautiful finish. Aystkniet high quality silk rainbow PLA+...
Three Upgraded Based on Ender 5 - V1.1.5 Silent Motherboard pre-installed,allowing for quieter and more precise printing performance. Durable Metal Extruder provides strongers pressure while pushing filament through the nozzoles which will...
1.Strong toughness and impact resistance. 2.Print Temperature Range & Diameter: 200-250. 1.75mm (tolerance ±0.03mm). 3.No bubble or dust inside, lower clog or tangling rate. 4.Sealed vacuum bag to keep it dry...
With 1.8° step angle (200 steps/revolution) and size 42x42x34mm It has 4 wires with 1m cable and 2.54mm pitch connector Each phase draws current 0.4A at 12V, with holding torque 26Ncm(36.8oz.in)...
Suitable for 17HD34008-22B mixing type stepping motor High speed motor controller, High Quality and Brand New 1m wire, one connect electrical machine, on the other end has variety optional ports;...
Motor Model: 42-34 Nema 17, widely work for Most 3D Printer Reprap Ender 3 CR-10 CR-10s S5, Prusa i3 Monoprice selece mini, Makerbot Mendel Kossel Tevo printer etc. 100% brand new,...
DURABLE, RIGID CONSTRUCTION; No more repurposed artist spatulas with spinning, twisting and turning cramp rings! PRACTICAL BUT TENDER; Gently slide underneath prints with ease to protect the build bed surface...
Mechanical Endstop kit is for RepRap 3D Printers or CNC machines, it is supported by RepRap electronics, RAMPS 1.4 and by other popular RepRap boards. Customized high quality connection, using...
High speed motor controller, High Quality and Brand New 1m wire, One connect electrical machine, on the other end has variety optional ports. Heat shrink tubing effect to prevent the...
Tougher and less brittle compared to regular PLA Easy to print at low temperature Low warping Biodegradable Limited smell
Latest QIDI 3d Printer QIDI Technology's latest LCD resin 3d printer, comprehensive leading industrial design, precision manufacturing . Double Z-axis linear guide Shadow 5.5S adopts the highest stable structure: unique dual-rail,...
Upgraded Version -This is the upgraded version of the original upgraded kit provided by Creality 3D which can be used for Creality V1/ V2 / V4.2.2 / V 4.2.7 mainboard. It include but...
Package: 4pieces clamps Made from Stainless steel material. it is used for 7mmm thickess bed platform (normally 3mm thickess alu bed and 4mm glass bed). It is compatible with Creality...
Pressure temperature range: 190 -220 ; High quality: 1.75mm, tolerance +/- 0.02mm; Weight: net weight 1kg, shipping weight 1.28kg Tangle Free: Specifically designed to reduce tangles; Jam-free: Specially developed to reduce...
Features: 2 phase, 1.8 degree step angle, 0.68Nm holding torque, 2.0A Rated Current, 4-wire Advantage: The stepping motor is featuring low vibration, low noise, low heating, high speed Digital Motor: With...
Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm ± 0.05mm internal...
UPGRADE MAGNETIC BUILD PLATE: The surface of black frosted with coarse sand design has strong flexibility and make it easy to stick and remove the model. HEAT-RESISTANT AND REPEATED USE:...