UK
Quality 8” 200W Active Sub / Subwoofer Bass Cabinet – Home Cinema Hi-Fi Stereo Amp
by CablefinderNew from:
£129.99
Shipping:
see website
Prices may incl. VAT *
Last refresh May/26/2018 03:33 PM
Last refresh May/26/2018 03:33 PM
or
or
(Sponsored, paid link)
Brand
Cablefinder
Connectivity
Wired
Custom Bundle
Yes
Manufacturer number
Wooden-Powered--Powerful-Compact-Audio-Amplifier
Model
3177
System Configuration
Single Active Subwoofer
Type
Subwoofer
Unit Type
Unit
Overview - Perfect for use at home, our stylish, compact and powerful active subwoofer will give you a quality bass note and achieve low ranges of sound that your standard speakers cannot. Simply run from your amplifier directly to the active sub, then out of the sub to your speakers.
The cabinet is made from wood and other high quality components including an 8" reinforced Driver and an internal amplifier with an active filter circuit.
How to install:
Connect the Sub to the mains using the mains lead supplied or an equivalent, good quality fig.8 mains lead.
Determine how the sub unit is to be configured. If already operating a stereo amplifier with 2 speakers, the M8S can be configured to "tap off" a signal from the amplifier output without affecting the power output of the left and right speakers.
Simply connecting the Left and Right amplifier outputs to the "AMPLIFIER HI LEVEL IN" terminals on the Sub and then from these terminals onto the left and right speakers effectively connects the Sub between the amplifier and speakers, which can simplify wiring, removing the need for a separate signal lead to the sub unit.
Alternatively, if a separate line level audio signal is available, connecting left and right RCA cables to the "LINE IN" connectors is preferred
With the VOLUME control turned fully down, switch on the power on the rear panel. Once powered up, gradually turn the VOLUME up part way and play a signal through the system.
Rotating the FREQ control will vary the cut off frequency of the internal active crossover circuit. The ideal setting depends upon the program material
The cabinet is made from wood and other high quality components including an 8" reinforced Driver and an internal amplifier with an active filter circuit.
How to install:
Connect the Sub to the mains using the mains lead supplied or an equivalent, good quality fig.8 mains lead.
Determine how the sub unit is to be configured. If already operating a stereo amplifier with 2 speakers, the M8S can be configured to "tap off" a signal from the amplifier output without affecting the power output of the left and right speakers.
Simply connecting the Left and Right amplifier outputs to the "AMPLIFIER HI LEVEL IN" terminals on the Sub and then from these terminals onto the left and right speakers effectively connects the Sub between the amplifier and speakers, which can simplify wiring, removing the need for a separate signal lead to the sub unit.
Alternatively, if a separate line level audio signal is available, connecting left and right RCA cables to the "LINE IN" connectors is preferred
With the VOLUME control turned fully down, switch on the power on the rear panel. Once powered up, gradually turn the VOLUME up part way and play a signal through the system.
Rotating the FREQ control will vary the cut off frequency of the internal active crossover circuit. The ideal setting depends upon the program material
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference. As a participant in the Amazon and eBay partner programs, metaspinner net GmbH earns from qualified sales.