UK
0.96 Inch I2C IIC Serial 128x64 OLED Module LCD Display 4 Pin Font Color White for Raspberry Pi Zero, Zero W, 3B, 3B+, STM32, Ardunio
by InnomakerNew from:
£8.99
Shipping:
see website
Prices may incl. VAT *
Last refresh Aug/27/2019 04:18 PM
Last refresh Aug/27/2019 04:18 PM
or
or
Brand
Innomaker
The 0.96 Inch I2C IIC Serial OLED is an advanced display which is self light emissive, high contrast, high response, low power consumptive, and large view angle, no backlight is required. Each OLED display is made of 128x64 individual OLEDs, each one is turned on or off by the controller chip.
This miniature OLED LCD display can be connect directly to any 3V or 5V microcontroller which has IIC interface without needing any kind of level shifter. So it's very easy to get up and running in your project.
Note:
>> All 0.96 Inch I2C IIC Serial OLED LCD Display Module has been tested twice before shipment, so if it cannot display, please double check your codes(especially the IIC address) and pin connections. If the pin connections are incorrect, the OLED will burn up in a minute.
>> We offer three kinds of OLED, all blue, all white, yellow & blue. For yellow & blue display, there is a two-pixel gap between the yellow pixels and the blue pixels for a good presentation. The gap doesn't count as rows of pixels.
>> IIC default address is 0x78, but for some usage cases it use 7 bit IIC address mode, So it should set to 0x3C like in Linux and adafruit's library.
>> IIC selectable address is 0x7A, but for some usage case it use 7 bit IIC address mode
This miniature OLED LCD display can be connect directly to any 3V or 5V microcontroller which has IIC interface without needing any kind of level shifter. So it's very easy to get up and running in your project.
Note:
>> All 0.96 Inch I2C IIC Serial OLED LCD Display Module has been tested twice before shipment, so if it cannot display, please double check your codes(especially the IIC address) and pin connections. If the pin connections are incorrect, the OLED will burn up in a minute.
>> We offer three kinds of OLED, all blue, all white, yellow & blue. For yellow & blue display, there is a two-pixel gap between the yellow pixels and the blue pixels for a good presentation. The gap doesn't count as rows of pixels.
>> IIC default address is 0x78, but for some usage cases it use 7 bit IIC address mode, So it should set to 0x3C like in Linux and adafruit's library.
>> IIC selectable address is 0x7A, but for some usage case it use 7 bit IIC address mode
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.