UK
KOHSTAR IR Rework T862++ BGA SMD Soldering Rework Infrared Station T-862
by KohstarNew from:
£459.00
Shipping:
see website
Prices may incl. VAT *
Last refresh Dec/06/2018 04:02 PM
Last refresh Dec/06/2018 04:02 PM
or
or
(Sponsored, paid link)
Brand
Kohstar
Technical parameters:
Supply voltage: AC 220 V 50 Hz
Power: 800 W
Preset temperature: 100 C -350 C
Heating element: Infrared light
Installed steps:
1.Load guide column. First relax the focusing frame fastening nut, press the arrowhead indicates the direction of insertion guide column.
2.Install the retaining ring. Relax positioning ring fastening nut, press the arrowhead indicates the direction of load positioning ring, after loading the rotational positioning loop fastening nut to secure it at the appropriate height.
3.The whole assembly. Relax the focusing frame fastening nut. Pick up the focusing frame, chassis alignment of the guide column corresponding nut, rotate the guide post. Rotate the focus frame tighten the nut so that the focusing frame fixed.
4.Infrared lamp body connection cable. Align the cable plug is inserted infrared lamp cable outlet. Rotate screws.
Note:
After the work is completed, do not immediately turn off the power, the fan cooling the lamp body.
Maintain ventilation vents open, light body and clean.
Guide column, focusing bracket timely wipe with grease.
For a long time do not use, you should unplug the power cord.
Be careful, high-temperature operation
Supply voltage: AC 220 V 50 Hz
Power: 800 W
Preset temperature: 100 C -350 C
Heating element: Infrared light
Installed steps:
1.Load guide column. First relax the focusing frame fastening nut, press the arrowhead indicates the direction of insertion guide column.
2.Install the retaining ring. Relax positioning ring fastening nut, press the arrowhead indicates the direction of load positioning ring, after loading the rotational positioning loop fastening nut to secure it at the appropriate height.
3.The whole assembly. Relax the focusing frame fastening nut. Pick up the focusing frame, chassis alignment of the guide column corresponding nut, rotate the guide post. Rotate the focus frame tighten the nut so that the focusing frame fixed.
4.Infrared lamp body connection cable. Align the cable plug is inserted infrared lamp cable outlet. Rotate screws.
Note:
After the work is completed, do not immediately turn off the power, the fan cooling the lamp body.
Maintain ventilation vents open, light body and clean.
Guide column, focusing bracket timely wipe with grease.
For a long time do not use, you should unplug the power cord.
Be careful, high-temperature operation
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference. As a participant in the Amazon and eBay partner programs, metaspinner net GmbH earns from qualified sales.