UK
TOPENS TC102 Photocell Infrared Beam Sensor Safety Photoelectric Motion Detector for Automatic Swing Sliding Gate Openers Garage Door Openers Security Alarm Systems Access Control Outdoor Use
by TOPENSNew from:
£29.00
Shipping:
see website
Prices may incl. VAT *
Last refresh Apr/08/2024 05:21 PM
Last refresh Apr/08/2024 05:21 PM
or
or
Brand
TOPENS
Trustworthy Infrared Sensor- The TOPENS TC102 Safety Photo Eye Beam Sensor employs infrared light for object detection, creating a safety barrier between the emitter and receiver. This photoelectric sensor identifies any movement interruption in the infrared beam, prompting the gate to stop or reverse automatically. It is strongly recommended to use the TC102 IR beam sensor with automatic gate opener system to ensure multiple protection & security.
Extensive Compatibility - Works with all the TOPENS gate openers, and compatible with most third party swing / sliding gate openers or garage door openers whose control board accepts Normal Open or Normal Close Dry Contact signal. It can be powered by the control board of the gate opener or by the external 12-24VDC or 12-24VAC power source. This infrared sensor is commonly employed in households, courtyards, farms, ranches, warehouses, and various commercial/industrial sites.
Ingenious Design- The infrared photocell sensor consists of two components: an emitter generating an infrared light beam and a receiver detecting interruptions. This non-contact sensing technology provides high detection accuracy with a fast response. In addition, the infrared beam sensor is immune to strong light interference, such as sunlight and vehicle headlights. Weather resistant for all seasons of the year.
Simple DIY Installation- Easily install by connecting both the receiver and the emitter to the automatic gate opener system. For optimal performance, mount the photocell sensor at least 20cm above the ground. Power on to determine the emitter position. The photocell status LED turns off indicating that the beam is aligned. Fix the emitter position when the status LED goes off. Ensure that there is no obstruction between the receiver and the emitter during alignment.
Exceptional Customer Support- All the TOPENS products come with a 12-month war-ranty against defects, a 30-day worry-free exchange & return and lifetime tech support. Visit TOPENS website for the user manual, installation video
Extensive Compatibility - Works with all the TOPENS gate openers, and compatible with most third party swing / sliding gate openers or garage door openers whose control board accepts Normal Open or Normal Close Dry Contact signal. It can be powered by the control board of the gate opener or by the external 12-24VDC or 12-24VAC power source. This infrared sensor is commonly employed in households, courtyards, farms, ranches, warehouses, and various commercial/industrial sites.
Ingenious Design- The infrared photocell sensor consists of two components: an emitter generating an infrared light beam and a receiver detecting interruptions. This non-contact sensing technology provides high detection accuracy with a fast response. In addition, the infrared beam sensor is immune to strong light interference, such as sunlight and vehicle headlights. Weather resistant for all seasons of the year.
Simple DIY Installation- Easily install by connecting both the receiver and the emitter to the automatic gate opener system. For optimal performance, mount the photocell sensor at least 20cm above the ground. Power on to determine the emitter position. The photocell status LED turns off indicating that the beam is aligned. Fix the emitter position when the status LED goes off. Ensure that there is no obstruction between the receiver and the emitter during alignment.
Exceptional Customer Support- All the TOPENS products come with a 12-month war-ranty against defects, a 30-day worry-free exchange & return and lifetime tech support. Visit TOPENS website for the user manual, installation video
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.