UK
Jansen Primer Sealer and Thermal Base Spray 400 ml Insulating Spray Stain
by JansenNew from:
£11.70
Shipping:
see website
Prices may incl. VAT *
Last refresh Mar/07/2019 06:10 AM
Last refresh Mar/07/2019 06:10 AM
or
or
(Sponsored, paid link)
Brand
Jansen
Fabloser and pigmented (in white) restricted colourway, and insulated base for indoors and outdoors. Quick drying with good insulation and barrier effect.
Primer for shut-off device and insulation of surface impurities. Polystyrene will not..
* Fast-drying
* Good insulation and barrier effect
* Outside and inside
Area of application:
Base + insulating paint on exotic woods and Holzästen, tar, resistant to water, smoke, soot, grease and nicotine stains better too.
Primer for absorbent surfaces such as wood, drywall, concrete, fibre cement and emulsion coats is good. Polystyrene will not..
Available colours: White and Clear
Gloss Level: Matt
Yield/consumption: approx. 1.5 2 m² per 400 ml spray can
Binder base: Plastic
Composition:
Polymeri... Titanium Dioxide, fillers, solvent-free, additives, propellant gas
Density: White: approx. 1,080 g/cm³ colourless approx. 0.83 g/cm³
Drying (at 23 °C and 60% rel. Humidity):
Staubtrocken after approx. 60 minutes;
Grip after approximately 90 minutes *
After approx. 3 - 4 hours überlackierbar
Applicator Type: Spray
Usage: Interior and exterior
Base treatment:
The subsurface must be, dry and clean.
Coating System:
Take 2-3 times Jansen blocking and insulating base Clear/White. Insulating thanks to the probe can be inspected.
Directions for use:
Can thoroughly Shake until the mixer ball can be heard starts to move, with colour white also have at least 1/2 minutes.
Spray distance: approx. 20 - 30 cm (12) multiple layers of thin spraying. The Überstreichbarkeit is with emulsion
Primer for shut-off device and insulation of surface impurities. Polystyrene will not..
* Fast-drying
* Good insulation and barrier effect
* Outside and inside
Area of application:
Base + insulating paint on exotic woods and Holzästen, tar, resistant to water, smoke, soot, grease and nicotine stains better too.
Primer for absorbent surfaces such as wood, drywall, concrete, fibre cement and emulsion coats is good. Polystyrene will not..
Available colours: White and Clear
Gloss Level: Matt
Yield/consumption: approx. 1.5 2 m² per 400 ml spray can
Binder base: Plastic
Composition:
Polymeri... Titanium Dioxide, fillers, solvent-free, additives, propellant gas
Density: White: approx. 1,080 g/cm³ colourless approx. 0.83 g/cm³
Drying (at 23 °C and 60% rel. Humidity):
Staubtrocken after approx. 60 minutes;
Grip after approximately 90 minutes *
After approx. 3 - 4 hours überlackierbar
Applicator Type: Spray
Usage: Interior and exterior
Base treatment:
The subsurface must be, dry and clean.
Coating System:
Take 2-3 times Jansen blocking and insulating base Clear/White. Insulating thanks to the probe can be inspected.
Directions for use:
Can thoroughly Shake until the mixer ball can be heard starts to move, with colour white also have at least 1/2 minutes.
Spray distance: approx. 20 - 30 cm (12) multiple layers of thin spraying. The Überstreichbarkeit is with emulsion
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference. As a participant in the Amazon and eBay partner programs, metaspinner net GmbH earns from qualified sales.