Features:
Displays Wood Moisture in LCD
Use on wood, paper, cardboard, etc
Memory contains 4 wood groups with calibrations for approximately 50 species of wood
Auto power off conserves battery energy
Data Hold function
Built-in battery check. Low battery icon display
Specifications:
Display: Large LCD characters display
Measurement principle: Electrical Resistance
Range: Wood: 0~99.9%
Resolution: 0.1%
Accuracy: ±0.5%
Electrode pin length: 10mm(0.4")
Electrode pins: Integrated
Auto Power OFF: After approx.15 minutes
Instrument Enclosures: ABS plastic
Operating Temperature: 0 to 40 C (32 to 104 F)
Operating Humidity: 85% Relative Humidity Maximum
Dimensions: 145 X 67 X 32mm (5.7" X 2.6" X 1.3")
Wood species Group Table:
A: Teak Walnut Afromosia Rubber tree
B: Keruing White poplar Beech Cedar Tola
C: Lauan Ash Elm Fir Maple Padauk Tola
D: Basswood Larch Pine Birch
How to use:
STEP 1: Take off the protection cap of the meter, and press "POWER" button
STEP 2: Press "MODE" to select matching wood groups (choose "D" mode to test lime wall)
STEP 3: Pushed the pins into the wood or the lime wall, and it displays reading
STEP 4: Until the reading stability, Press "HOLD", and you can read the record.
STEP 5: Press "POWER" button to close the device, or 15m Auto power off function save your battery
Package Included:
1 x Wood Moisture Meter
Note:
1. If it need to test plaster wall or brick wall, please press the button "Mode" to set testing Wall mode to D before testing it.
2. Sharp electrode pins