UK
MantisTol 326mm Pro Vinyl Floor Cutter LVT-330 for VCT, LVT, PVC, LVP
by MANTISTOLNew from:
£169.41
Shipping:
see website
Prices may incl. VAT *
Last refresh Aug/18/2023 10:05 AM
Last refresh Aug/18/2023 10:05 AM
or
or
Brand
MANTISTOL
Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty.No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time.
No electricity needed, Easy and Professional cutting vinyl floor, Save time. Replacement Blade;https://www.amazon.co.uk/Sharp-... cutting width and 8mm cutting depth. Straight cut, Angle cut; " L & " cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45° Angle Cutting, Translational cutting, the deep of the throat is 115mm/4.5inch.Easy to use and to carry around.
2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service lifeman-made damage is not covered by the warranty.
" L & " cut and Lengthwise cut is suitable for soft flooring. SPC has a stone powder composition, the material is brittle and high in hardness, so it will crack. So these three cutting methods are not suitable for SPC. Show videohttps://youtu.be/PivHDYr9nnw
Why does the floor you cut crack Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder; Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts;If you want to corner cuts, Each cut can only cut 2mm deep & approximately 100mm cutting length, which is equal to that each cut is the upper surface of the floor. (requires some skills and control your strength)
Soft vinyl flooring that can be fully cutHard and prone to cracking flooring, for long cut, L cut, and u cut, please refer to the usage tips. Originally, I didn't mind cutting, but since many users often need to use it, I wrote down the usage skills. In this area, users can easily damage the cutter due to improper operation. If the blade is used for a long time and becomes not sharp, it is difficult to make shallow cuts. Be sure to keep the blades sharp or replace them.
The blade of our LVT-330 cutters can be moved. There are many complex scenes on the construction site that need special cutting (irregular cornersmost of which are columns, door edges and wall corners). It can help you finish your work smoothly. Be sure to buy one of the good things and try it, not to mention the beautiful price
No electricity needed, Easy and Professional cutting vinyl floor, Save time. Replacement Blade;https://www.amazon.co.uk/Sharp-... cutting width and 8mm cutting depth. Straight cut, Angle cut; " L & " cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45° Angle Cutting, Translational cutting, the deep of the throat is 115mm/4.5inch.Easy to use and to carry around.
2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service lifeman-made damage is not covered by the warranty.
" L & " cut and Lengthwise cut is suitable for soft flooring. SPC has a stone powder composition, the material is brittle and high in hardness, so it will crack. So these three cutting methods are not suitable for SPC. Show videohttps://youtu.be/PivHDYr9nnw
Why does the floor you cut crack Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder; Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts;If you want to corner cuts, Each cut can only cut 2mm deep & approximately 100mm cutting length, which is equal to that each cut is the upper surface of the floor. (requires some skills and control your strength)
Soft vinyl flooring that can be fully cutHard and prone to cracking flooring, for long cut, L cut, and u cut, please refer to the usage tips. Originally, I didn't mind cutting, but since many users often need to use it, I wrote down the usage skills. In this area, users can easily damage the cutter due to improper operation. If the blade is used for a long time and becomes not sharp, it is difficult to make shallow cuts. Be sure to keep the blades sharp or replace them.
The blade of our LVT-330 cutters can be moved. There are many complex scenes on the construction site that need special cutting (irregular cornersmost of which are columns, door edges and wall corners). It can help you finish your work smoothly. Be sure to buy one of the good things and try it, not to mention the beautiful price
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.