Specifications:
Size: 35*32*17mm
Operating voltage: DC 12V
Operating Current: 6mA
Operating frequency: 433MHz
Operating temperature: -40 to + 80
Receiver sensitivity: -105dbm
Output voltage: DC
Output Current: 10A
Code: Learning code. (Jog/ Non-Locked, Inter-lock/ locked, Auto-lock / Auto-Locked)
Output working way:
Jog /Non-locked: Press a button is working/ on and loosen your finger on the same button is stop/ off. (A
channel change needs a remote control button)
Auto-lock: Press one button for one time is working/ on and press the same button is stop/ off. (A channel
change needs a remote control button)
Inter-lock / locked: Press a button is working/ on and press another button is stop/ off. (A channel change
needs 2 remote control buttons)
Learning and removing method:
1. Learning method: Press the learning code for 3 seconds. The indicator will be off, and then loosen your
finger, press any button of the remote control to transmit signal, the indicator flash 3 times and then
normally on which means you learn it successfully.
2. Remove/clean method: Press the learning button about 8 seconds, the indicator will be from being off to
on all the time