UK
N Type Connector Male Crimp On Plug Coaxial Connector for LMR400 Belden 9913 Body Brass Construction Nickel Plated PTFE Insulator 5 pieces
by FiotasyNew from:
£9.99
Shipping:
see website
Prices may incl. VAT *
Last refresh Sep/23/2018 11:32 PM
Last refresh Sep/23/2018 11:32 PM
or
or
Brand
Fiotasy
1.Materials & Plated:
N connector Body brass nickel plated, Pin brass gold plated, Teflon(PTFE) Insulator for a reliable signal every time .
lmr400 n connector Salt spray test for 48 hours , VSWR below 1.3(DC-6G)
2.Electricail Characteristics:
Impedance:50 ohm
Dielectric Withstanding Voltage:2500V (RMS)
Contact Resistance:Center conductor 1m
Outer conductor 1m Insulation Resistance : 5000M
Durability : 500 cycles
Temperature range: -40°C to +85 °C
3.Package include:
5 pieces Coaxial connectors with Black heat shrink tube.
4. Build or Repair Coaxial Cable:
Use to create your own custom length N cable assembly with this N male crimp connector which is widely used in Wireless Communications Systems,
Short Antenna Feeder runs or any other application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Mobile Antennas).
It is so easy to install, is reliable, and is built to last.Work with the 50ohm low loss RF cable :LMR-400 and Belden 9913 and L-com ca-400 and RG8 .Use proper crimping tool for assembly It connected with any brand N female connector.
5.Leave feedback :
A. If you are unhappy for any reasons, Pls don not leave us negative feedback firstly .Please contact us via message, Or E-mail before you leave the negative feedback. For sure we will try our 100% efforts to solve this .
B. We are in China, because of the time different. we can not reply you in time.We will reply your message within 24 hours, Please do not forget to check your message box, Or E-mail box.
If you do not receive our reply, Maybe it was stopped by your mail server, So please feel free to contact us again.Thanks for your highly cooperations!
C. dispute or case could not help you anything, And waste time for both of us
N connector Body brass nickel plated, Pin brass gold plated, Teflon(PTFE) Insulator for a reliable signal every time .
lmr400 n connector Salt spray test for 48 hours , VSWR below 1.3(DC-6G)
2.Electricail Characteristics:
Impedance:50 ohm
Dielectric Withstanding Voltage:2500V (RMS)
Contact Resistance:Center conductor 1m
Outer conductor 1m Insulation Resistance : 5000M
Durability : 500 cycles
Temperature range: -40°C to +85 °C
3.Package include:
5 pieces Coaxial connectors with Black heat shrink tube.
4. Build or Repair Coaxial Cable:
Use to create your own custom length N cable assembly with this N male crimp connector which is widely used in Wireless Communications Systems,
Short Antenna Feeder runs or any other application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Mobile Antennas).
It is so easy to install, is reliable, and is built to last.Work with the 50ohm low loss RF cable :LMR-400 and Belden 9913 and L-com ca-400 and RG8 .Use proper crimping tool for assembly It connected with any brand N female connector.
5.Leave feedback :
A. If you are unhappy for any reasons, Pls don not leave us negative feedback firstly .Please contact us via message, Or E-mail before you leave the negative feedback. For sure we will try our 100% efforts to solve this .
B. We are in China, because of the time different. we can not reply you in time.We will reply your message within 24 hours, Please do not forget to check your message box, Or E-mail box.
If you do not receive our reply, Maybe it was stopped by your mail server, So please feel free to contact us again.Thanks for your highly cooperations!
C. dispute or case could not help you anything, And waste time for both of us
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.