UK
WonVon MT1 Motorcycle Dash Cam 1080P 2.7" LCD Motorcycle Recording Camera Dual Lens Front and Rear Camera Built-in WiFi, with GPS module, Night Vision, G-Sensor, Loop Recording
by WonVonNew from:
£125.99
Shipping:
see website
Prices may incl. VAT *
Last refresh Sep/21/2019 10:01 AM
Last refresh Sep/21/2019 10:01 AM
or
or
Brand
WonVon
Product Specification:
Model number: MT1
DSP: NTK 96663
Sensor: Front & rear camera IMX323
LCD: 2.7 inch LCD monitor
Lens: Waterproof 6G glass
Camera: Waterproof
Body: non-waterproof (with waterproof rubber cover)
Resolution: Front-1080P, Rear-1080P
Video compression format: H.264 MOV
Video output format: NTSC / PAL
Light source frequency: 50Hz / 60Hz
Speed unit: KM / H MPH
Power: capacitor version
WIFI: Support
GPS: supported by GPS module
RF control: support (wired remote control)
Loop recording: 1 minute / 3 minutes / 5 minutes
Emergency recording: G sensor
Voice recording: support
Display mode: Front camera / Rear camera / Front and rear simultaneous
Motion detection: on / off
Collision sensitivity: off / low / medium / high
System language: 10 languages including English / Traditional Chinese / Japanese /
Package Contents:
1 x MT1 body
2 x camera (with a 2.8M extension cable)
2 x metal base
2 x plastic base
1 x power cable
1 x USB cable
2 x adhesive tape (for camera base)
2 x round 3M adhesive tape
2 x magnet
8 x screw
2 x hex screw
1 x hex wrench
1 x sticker
4 x Velcro
1 x GPS module
1 x rubber cover (for waterproof and dust-proof)
1 x wired remote control
1 x User Manual
Note
You could find the detailed installation instructions in the manual: connect each component correctly according to the markings on the wires to prevent malfunction. The recorded video is in the positive direction when the recessed hole of the lens is facing up. The car camera is waterproof, but the body of the MT1 is not waterproof (with a waterproof rubber cover) The GPS module is perfect for receiving signals when cam installed the outside of the bike. While installing
Model number: MT1
DSP: NTK 96663
Sensor: Front & rear camera IMX323
LCD: 2.7 inch LCD monitor
Lens: Waterproof 6G glass
Camera: Waterproof
Body: non-waterproof (with waterproof rubber cover)
Resolution: Front-1080P, Rear-1080P
Video compression format: H.264 MOV
Video output format: NTSC / PAL
Light source frequency: 50Hz / 60Hz
Speed unit: KM / H MPH
Power: capacitor version
WIFI: Support
GPS: supported by GPS module
RF control: support (wired remote control)
Loop recording: 1 minute / 3 minutes / 5 minutes
Emergency recording: G sensor
Voice recording: support
Display mode: Front camera / Rear camera / Front and rear simultaneous
Motion detection: on / off
Collision sensitivity: off / low / medium / high
System language: 10 languages including English / Traditional Chinese / Japanese /
Package Contents:
1 x MT1 body
2 x camera (with a 2.8M extension cable)
2 x metal base
2 x plastic base
1 x power cable
1 x USB cable
2 x adhesive tape (for camera base)
2 x round 3M adhesive tape
2 x magnet
8 x screw
2 x hex screw
1 x hex wrench
1 x sticker
4 x Velcro
1 x GPS module
1 x rubber cover (for waterproof and dust-proof)
1 x wired remote control
1 x User Manual
Note
You could find the detailed installation instructions in the manual: connect each component correctly according to the markings on the wires to prevent malfunction. The recorded video is in the positive direction when the recessed hole of the lens is facing up. The car camera is waterproof, but the body of the MT1 is not waterproof (with a waterproof rubber cover) The GPS module is perfect for receiving signals when cam installed the outside of the bike. While installing
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.