Features:
A software defined radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz.
Designed to enable test and development of modern and next generation radio technologies.
HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.
HackRF One has an injection molded plastic enclosure and ships with a micro USB cable. ANT500 is recommended as a starter antenna for HackRF One.
HackRF One is test equipment for RF systems. It has not been tested for compliance with regulations governing transmission of radio signals.
Description:
1MHz to 6 GHz operating frequency
Half-duplex transceiver
Up to 20 million samples per second
8-bit quadrature samples (8-bit I and 8-bit Q)
Compatible with GNU Radio, SDR , and more
Software-configurable RX and TX gain and baseband filter
Software-controlled antenna port power (50 mA at 3.3 V)
SMA female antenna connector
SMA female clock input and output for synchronization
Convenient buttons for programming
Internal pin headers for expansion
Hi-Speed USB 2.0
USB-powered
Open source hardware
Specifications:
Color: black
Size: 125*80*26mm
Frequency band: 1MHz-6Ghz
Data bandwidth: 20MHz
Sampling accuracy ( ADC/DAC) : 8BIT
Sampling speed ( ADC/DAC): 20Mbps
Interface: USB2.0
Maximum transmitting power: 10dbm
64QAM transmitting EVM: 1.5%
Package Included:
1 x HackRF One Software Defined Radio
1 x USB cable
3 x FM antennas
Note:
Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
Please allow slight measurement deviation caused by manual measurement