UK
Zinniaya 2.4GHz 300Mbps Mini Wireless Module 802.11b / g / n Wi-Fi Signal Transmission Module PCBA Board Support 1-14WiFi Channels
by ZinniayaLast refresh Sep/20/2019 04:46 PM
Features:
Two software-controllable operating modes:routing mode, Bridge+Repeater mode.
Support intelligent transparent bridge mode, also support AP Client and AP Station.
Support 3G/4G Module(3G USB Dongle)
Independent hardware data processing, does not consume host system resources, without installing any drivers
In bridge mode, fool configuration to facilitate the secondary development implanted into other host systems.
Built-in WEB configuration services, available configure module parameters through the web.
Built-in SOCKET monitoring services, used to control two GPIO (1.5A) output, nine kinds of GPIO control state to facilitate the secondary development and function expansion.
Description:
... VDNS technology, in bridge mode, can be configured via logging on the domain login page, solve the problem that configure and secondary development.
Two external antenna RF Female.
Support for online firmware upgrade.
Support open-wrt.
Specification:
Clocked of main chip: 580MHz
32Mb SDRAM, can be extended 64Mb; 4Mb SPI Flash, can be extended 8Mb(Byte).
WiFi working frequency: 2.4GHz, 2T2R dual antenna, 300Mbps transmission rate.
Support 1-14WiFichannels.
Rated Power< 3W.
Output power of Module RF: 13.5dbm--14.5dbm.
Adopt the original creation D/A temperature compensated auto frequency control technology(TAFC)