Install Steps After Waterproof Test and Dry Water:
1Open the plug of the charging port and find the notch in the lower right of the case, and insert a small coin to the lower right notch and rotate it to open the case
2Remove any screen protector on your phone
3Remove any screen protecting films on the case
4Put your phone into the front cover of the case
5Align the back cover, and press all around of the case, make it fully sealed and fit the phone' s screen(no bubbles), then close the charging port plug.
What In The Box:
1 x Waterproof Case for iPhone 6 Plus/iPhone 6s Plus (5.5 inch)
1 x Metal Hook
1 x Headphone Jack Adapter
1 x Wrist Strap
1 x Cleaning Cloth
1 x User Manual
Attention:
1 Please Do Water Test according to the User Manual before placing phone in the case. Ensure all the seamsare closed.
2The clear built-in Screen Protector is Scratch-Resistant, so please don't install additional Glass Screen Protector, which will compromise the touch sensitivity and keep the case from being closed completely.
3This case can fit the apple original lighting charger or the similar sized charger ONLY. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port