UK

NEW 3 BUTTON ENTRY REMOTE KEY Control REPLACEMENT with INTERIOR ELECTRONICS TRANSPONDER CHIPS & LITHIUM COIN CELL

How to program a new key fob

Please follow these steps

1.Check that the vehicle battery is fully charged and that the anti-theft alarm system is not armed.

2. Place the old fob at least 10 meters away from vehicle. Place new fob on dashboard.

3.Close all doors.

4 Insert key into ignition.

5.Note:After cycling the ignition, the ignition key must be in position II.Turn the ignition key from position 0 to position II eight times within ten seconds.until a sound is heard and leave the ignition on. The doors will lock automatically.Now, use the new fob to unlock the doors.The door locks will cycle to confirm that the remote transmitter has been successfully programmed.

6.Note:After a remote transmitter has been successfully programmed, the anti-theft and double locking module will reset the programming mode allowing a further 20 seconds to program the next remote transmitter.Repeat step 4 to program additional remote transmitters.

7.Turn the ignition key to position 0.The door locks will cycle to confirm that the anti-theft alarm and double locking module has exited the programming mode.

8.Test the system for normal operation.

If you do not know how to do it

Latest products for Price Comparison

Further categories