Additional Module Universal Car Nitro Petrol OBD2 CENTRALINA Chip Tuning ...

Increase the performance of your car petrol. The additional Nitro module is able to communicate with the control unit of your car. With the data received from the controller, Nitro is able to adjust the pressure, the amount of fuel injection, the time and the pressure. Just need connect to the OBD2 socket of your car which is normally under the dashboard, to the side guide, steering in the vicinity of the suspension. The found for example close to the fuse box. Nitro OBD2 is plug & drive. Connected to the car and routes 200 km is approximately, Nitro adapts to your driving style, to your driving habits and autoregola by communicating with the control unit in order to achieve better performance. Are driving and more the additional module Nitro increases and maintains the performance of the engine (+ 35%) and pair (+ 25%). Nitro Car OBD2 works within the tolerance of the engine provided by Home and does not damage the engine, or the installation and calibration unit: 1) remove the vehicle's ignition key; 2) find the OBD2 socket and connect the additional Nitro; 3) insert the key into the ignition lock, and turn the key to first stage. Do not start the vehicle; 4) press the reset button for about 5 seconds. After releasing the reset button, we must only wait for about one minute to allow the Nitro module for OBD2 to communicate with the control unit; 5) to start the engine. Nitro OBD2 version of yellow is compatible with all petrol vehicles with production from 1996 onwards. Because the performance improvement of a vehicle depends on different parameters

Additional Module Universal Car Nitro Petrol OBD2 CENTRALINA Chip Tuning

Latest products for Price Comparison

Further categories