UK
Fluorescent Tubes Light 4FT / 120cm T8 17W Led Tube Neutral White 4000k 1960 lm with Starter for Room Office Workshop Indoor 5 Pack
by HOMEDEMONew from:
£35.99
Shipping:
see website
Prices may incl. VAT *
Last refresh Nov/02/2018 10:07 PM
Last refresh Nov/02/2018 10:07 PM
or
or
Brand
HOMEDEMO
Description:
The LED tube is ideal for simple lighting tasks.
The energy-saving light source has a full brightness without warm-up phase or flickering and is therefore optimally suitable in combination with sensors.
The illumination of the tube is particularly homogeneous and it also has an integrated electronic ballast.
Simply change the supplied starter and it is ready for use.
The LED alternative has a wide beam angle, a long life and is mercury-free.
The light source is particularly suitable for easy and safe replacement of classic T8 fluorescent tubes.
Easy installation:
Option 1, installation with starter
Turn off the power supply first.
Remove the old fluorescent tube and the old starter.
Insert the new starter and the new LED light.
Then turn on the power and the LED tube is working properly.
Option 2, installation without starter
In applications where electronic ballasts can not be used, the following workflow should be used.
Turn off the power supply first.
Remove the old fluorescent tube.
Remove the electronic ballast.
Wire the tube sockets G13 as instructed.
Insert the LED tube.
Then turn the power back on and the LED tube is working properly.
Technical data:
Length: 120cm
LED Count: 96 LEDs
Power consumption: 17 watts
Beam angle: 270°
Base: T8/G13
Rated life: 30000 h
Nominal luminous flux: 1960 lm
Color rendering (CRI): 80
Switching cycles: >100000x ON/OFF
Electric power factor: >0.9
Infeed: one-sided
Operating voltage: 230 V AC
The LED tube is ideal for simple lighting tasks.
The energy-saving light source has a full brightness without warm-up phase or flickering and is therefore optimally suitable in combination with sensors.
The illumination of the tube is particularly homogeneous and it also has an integrated electronic ballast.
Simply change the supplied starter and it is ready for use.
The LED alternative has a wide beam angle, a long life and is mercury-free.
The light source is particularly suitable for easy and safe replacement of classic T8 fluorescent tubes.
Easy installation:
Option 1, installation with starter
Turn off the power supply first.
Remove the old fluorescent tube and the old starter.
Insert the new starter and the new LED light.
Then turn on the power and the LED tube is working properly.
Option 2, installation without starter
In applications where electronic ballasts can not be used, the following workflow should be used.
Turn off the power supply first.
Remove the old fluorescent tube.
Remove the electronic ballast.
Wire the tube sockets G13 as instructed.
Insert the LED tube.
Then turn the power back on and the LED tube is working properly.
Technical data:
Length: 120cm
LED Count: 96 LEDs
Power consumption: 17 watts
Beam angle: 270°
Base: T8/G13
Rated life: 30000 h
Nominal luminous flux: 1960 lm
Color rendering (CRI): 80
Switching cycles: >100000x ON/OFF
Electric power factor: >0.9
Infeed: one-sided
Operating voltage: 230 V AC
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.