UK

Bowink Wireless Bluetooth Controller For PS3 Double Shock - Bundled with USB charge cord (Green Lighning and Red Lighning)

How to connect

1. Connect to console with cable, charge for 10 minutes, press and hold middle round button for 3 seconds until only 1 indicator works.

2. Then disconnect the cable, wait for one or two minutes. It will pair Bluetooth automatically with the console (The 4 indicators will stop blinking, instead only 1 indicator remains bright, meaning it is connected already).

NOTE:

If you can't sync to your console by Bluetooth or your controller can't be charged normally, please reset it first.

Reset steps

1.Turn on your controllerPress the round button and the indicator lighting

2. Press the small hole with a small pin.There is a small hole on the back of the controller

3. Operate it again according to the instruction above.

How to charge

Connect to console with cablethe 4 lights will flicker and extinguish when it is fully charged.

Attention please: do not use cellphone's charger to charge it, since cellphone's voltage is more higher , which may damage the controller

Note

- It comes from Third-party, not made by SONY.

- Please charge the controller fully before use, so as to avoid power shortage in use.

- If you mainly play FPS games

Latest products for Price Comparison

Further categories