UK
SeeedStudio Mesh Bee Open Source Zigbee Pro Module With Mcu (Jn5168) It Is A 2.4Ghz Wireless Transceiver
by SeeedstudioNew from:
£39.99
Shipping:
see website
Prices may incl. VAT *
Last refresh Jul/16/2018 06:15 PM
Last refresh Jul/16/2018 06:15 PM
or
or
Brand
Seeedstudio
Mesh Bee is a 2.4GHz wireless transceiver from seeed studio. It's based on NXP's newly JN516x series wireless microcontroller chip and supports ZigBee Pro network stack. The factory firmware wraps the complicated ZigBee stack operation into a few easy to use serial commands, and drives Mesh Bee into a transparent serial communication node that can be part of a simple point-to-point connection or a complex mesh network. Moreover, Mesh Bee is totally open hardware and open sourced, which means that you can customize the firmware on your requirements. You can use JN516x's ARM core to control things and JenOS to simplify your development. The development environment and tools from NXP are all free.
Features:
- Range: Indoor/Urban: up to 30m; Outdoor line-of-sight: up to 100m;
- Receiver Sensitivity: -95dBm
- Data Transmission Rate: 4800, 9600, 19200, 38400, 57600, 115200 (bps)
- Working Frequency: unlicensed 2.4GHz band
- Communication type: Point to Point or Start Network or Mesh Network
- OTA support: update node's firmware on-the-air
- Easy-to-Use Serial Interface and rich extendable ports
Specification:
- Microprocessor :JN5168 (32-bit RISC CPU, 32MHz clock speed)
- Resources :256kB/32kB/4kB (Flash/RAM/EEPROM)
- PCB size :24.5mmx30.5mmx0.8mm
- Outline Dimension :24.5mmx30.5mmx9.77mm
- Indicators :No
- Power supply :3.3V
- IO counts :12
- ADC input :3(2 multiplexing with IO)
- Interfaces :UARTx2, SPI, I2C
- Program interface :UART+MISO
- Connectivity :Socket compatible with XBee
- Communication Protocol :Uart(TTL)
- Operating Frequency Band :2.4GHz
- Stack/Software :RF4CE, JenNet-IP
Features:
- Range: Indoor/Urban: up to 30m; Outdoor line-of-sight: up to 100m;
- Receiver Sensitivity: -95dBm
- Data Transmission Rate: 4800, 9600, 19200, 38400, 57600, 115200 (bps)
- Working Frequency: unlicensed 2.4GHz band
- Communication type: Point to Point or Start Network or Mesh Network
- OTA support: update node's firmware on-the-air
- Easy-to-Use Serial Interface and rich extendable ports
Specification:
- Microprocessor :JN5168 (32-bit RISC CPU, 32MHz clock speed)
- Resources :256kB/32kB/4kB (Flash/RAM/EEPROM)
- PCB size :24.5mmx30.5mmx0.8mm
- Outline Dimension :24.5mmx30.5mmx9.77mm
- Indicators :No
- Power supply :3.3V
- IO counts :12
- ADC input :3(2 multiplexing with IO)
- Interfaces :UARTx2, SPI, I2C
- Program interface :UART+MISO
- Connectivity :Socket compatible with XBee
- Communication Protocol :Uart(TTL)
- Operating Frequency Band :2.4GHz
- Stack/Software :RF4CE, JenNet-IP
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.