UK
TOOGOO PDB XT60 Power Distribution Board BEC 5V 2A 12V 0.5A with XT60 Plug for DIY Quadcopter Output Support 6 ESC for X or H Design FPV Racing Quad drone
by TOOGOONew from:
£2.27
Shipping:
see website
Prices may incl. VAT *
Last refresh Nov/15/2018 01:58 PM
Last refresh Nov/15/2018 01:58 PM
or
or
Brand
TOOGOO
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration.
TOOGOO(R) PDB XT60 Power Distribution Board BEC 5V 2A 12V 0.5A with XT60 Plug for DIY Quadcopter Output Support 6 ESC for X or H Design FPV Racing Quad drone
Explanation:
Material: circuit board
Color as shown
Board size: 5.2 cm* 3.6cm *0.3cm
Board weight: 7.5g (includes 11g)
2oz copper, 4-layers & 1.6mm PCB
Built-in XT60 Socket
Light and durable for intensive usage
Quick & Easy Installation
Total 6 pairs ESC solder tabs are fit for H or X type frame
5V & 12V Output LED indicators & Short circuit tolerant
General:
Input voltage range (3S-4S LiPo operation): 9-18V DC
Regulated outputs: 5V and 12V outputs
ESC outputs:
Continuous current: 25A*4 or 15A*6
Peak current (10 seconds/minute): 30A*4 or 20A*6
BEC 5V output:
Designed for: RC Receivers, Flight controllers, OSD, and Servos
BEC Mode: Linear
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant: 5 seconds/minute
BEC 12V output:
Designed for: Video TX or FPV camera with linear regulator
BEC Mode: Linear
Suggested battery: 4S LiPo (13~18V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant: 2 seconds/minute
Package Contents:
1 * PDB Board
1 * XT60 Connector
Only the above package content
TOOGOO(R) PDB XT60 Power Distribution Board BEC 5V 2A 12V 0.5A with XT60 Plug for DIY Quadcopter Output Support 6 ESC for X or H Design FPV Racing Quad drone
Explanation:
Material: circuit board
Color as shown
Board size: 5.2 cm* 3.6cm *0.3cm
Board weight: 7.5g (includes 11g)
2oz copper, 4-layers & 1.6mm PCB
Built-in XT60 Socket
Light and durable for intensive usage
Quick & Easy Installation
Total 6 pairs ESC solder tabs are fit for H or X type frame
5V & 12V Output LED indicators & Short circuit tolerant
General:
Input voltage range (3S-4S LiPo operation): 9-18V DC
Regulated outputs: 5V and 12V outputs
ESC outputs:
Continuous current: 25A*4 or 15A*6
Peak current (10 seconds/minute): 30A*4 or 20A*6
BEC 5V output:
Designed for: RC Receivers, Flight controllers, OSD, and Servos
BEC Mode: Linear
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant: 5 seconds/minute
BEC 12V output:
Designed for: Video TX or FPV camera with linear regulator
BEC Mode: Linear
Suggested battery: 4S LiPo (13~18V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant: 2 seconds/minute
Package Contents:
1 * PDB Board
1 * XT60 Connector
Only the above package content
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.