UK
WIFI FPV Version DROCON Cyclone X708W Drone with HD Camera for Beginners Kids Training Quadcopter with Headless Mode One Key Return (X708W WIFI FPV VERSION)
by DROCONNew from:
£55.99
Shipping:
see website
Prices may incl. VAT *
Last refresh Jun/20/2018 10:12 PM
Last refresh Jun/20/2018 10:12 PM
or
or
Brand
DROCON
SPECIFICATION:
Dimension19 x 19 x 6 cm
Weight: 105g
Control Distance80 m
Charging Time60~80 min
Flying time8.5 min
Cautions :
1. Don't use or charge a battery if it shows signs of swelling, pierced, or damaged in any way.
2. Don't charge the battery directly after use, let it cool down to avoid overheating.
3. Don't charge the battery with current input above 1A. Never overcharge.
Tips:
1.Flying errors may happen after flights, a CALIBRATION and some TRIM WORK will fix the problem.
2.Motors may heat up if being misused. Take a 10 min break between flights to cool them down.
TRAINING:
Before Flight:
1. Ensure batteries are fully charged, no defects on propellers; Connect the battery to the drone, the LED lights flash quickly then slow down within seconds.
2. Make sure the drone is put on a flat surface.
3. Paring: Turn on the controller, the indicator flashes slowly. Push the left stick up and down, the indicator and LED lights turn to still simultaneously, then paring is succeeded.
4. Calibration: Push both control sticks to the right bottom and hold them on, the LED lights flash and stop within seconds, calibration is done.
Operation Practice:
1.Switch the speed mode to low speed at the very beginning.
2.Get use to the throttle stick slowly until you can understand how it works.
3.Get use to the trim buttons until you can adjust the drone to be close to hovering.
4.If you can't tell the front of the drone, try to play under headless mode at first.
5.Try one key return : Remember it only works under headless mode
Dimension19 x 19 x 6 cm
Weight: 105g
Control Distance80 m
Charging Time60~80 min
Flying time8.5 min
Cautions :
1. Don't use or charge a battery if it shows signs of swelling, pierced, or damaged in any way.
2. Don't charge the battery directly after use, let it cool down to avoid overheating.
3. Don't charge the battery with current input above 1A. Never overcharge.
Tips:
1.Flying errors may happen after flights, a CALIBRATION and some TRIM WORK will fix the problem.
2.Motors may heat up if being misused. Take a 10 min break between flights to cool them down.
TRAINING:
Before Flight:
1. Ensure batteries are fully charged, no defects on propellers; Connect the battery to the drone, the LED lights flash quickly then slow down within seconds.
2. Make sure the drone is put on a flat surface.
3. Paring: Turn on the controller, the indicator flashes slowly. Push the left stick up and down, the indicator and LED lights turn to still simultaneously, then paring is succeeded.
4. Calibration: Push both control sticks to the right bottom and hold them on, the LED lights flash and stop within seconds, calibration is done.
Operation Practice:
1.Switch the speed mode to low speed at the very beginning.
2.Get use to the throttle stick slowly until you can understand how it works.
3.Get use to the trim buttons until you can adjust the drone to be close to hovering.
4.If you can't tell the front of the drone, try to play under headless mode at first.
5.Try one key return : Remember it only works under headless mode
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.