Product parameters:
Product Name: LCD Solar Controller
Material: ROHS + ABS
Size: about 168 * 94 * 35mm / 6.61 * 3.70 * 1.38in
Model: YCX003B(30A)/ YCX003C(40A)/ YCX003D(50A)/ YCX003E(60A) / YCX003F(100A)
System voltage: 12 / 24V adaptive
Rated charging current: 30a / 40a / 50A / 60a / 100A
Rated discharge current: 10a / 20a / 20a / 30a / 30A
Solar photovoltaic voltage: 12V battery, 18V solar panel, 24V battery, 36 solar panels
Full voltage value: lithium battery (12.2V) / B02 gel battery (14.2V) / B03 open circuit (14.6V)
Floating charge voltage: 13.7 V (default, adjustable)
Discharge cut-off voltage: 10.7 V (default, adjustable)
Discharge recovery voltage: 12.6 V (default, adjustable)
Standby current: 10mA
USB output: 5V / 2A MAX
Operating temperature: - 35 - 60
product information:
Menu key: switch parameter display interface and settings
Upturn: Press this button once to add a level to the corresponding parameter
Down: Press this button once to lower the corresponding parameter by one level
Setting instructions:
1. Press the menu button in the main interface, select the interface to adjust the corresponding parameters, and set the working status of the device.
2. Load working mode, COT manual mode loading output, AUTO automatic light control mode. 00:58 sets the output time after no sunlight.
note:
B... installing for the first time, make sure that the battery voltage is sufficient for the controller to recognize the battery.
Solar controllers are only suitable for lead acid batteries such as open, AGM, gel