Universal 2-channel receiver Rolling Fixed code 300Mhz-868Mhz 12 - 24 VAC / DC. Compatible with: NICE FLO1R-S, FLO2R-S, FLO4R-S, FLO1RE, FLO2RE, FLO4RE, ON1, ON2, ON4, ON1E, ON2E, ON4E, INTI (all colors)

This universal receiver 100% compatible with the following NICE FLO1R-S, FLO2R-S, FLO4R-S, FLO1RE, FLO2RE, FLO4RE, ON1, ON2, ON4, ON1E, ON2E, ON4E, INTI (all colors), VERY VR remote controls. 1. Brand selector: With 8 dip switches user can make different combination for different remote brands. The brands selection you will find in the manual provided. For NICE 433Mhz remote controls, just move Dip-switch 8 UP. Learn Button and LED: There're 2 independent channels. Each channel has independent learn button SW1, SW2. 2. Power Input Selector: This receiver can work at AC/DC 12V~30V. Shorten pin 1&2 for 12V power supply; shorten 2&3 for 24V power supply. 3. Programming procedure: a) Move Dip-switch 8 UP. b) Press the learn button. The will LED turn on. c) Press the button on the NICE remote control. The LED will starts flashing, which means that remote control was programmed successfully. d) Repeat step 2 for another button. 4. The 2-nd channel programming procedure is the same. 5. Erase all data from the memory card: Press and hold learn button. The LED will start flashing. Keep the button pressed, until the LED will turn off. All saved data in the memory card will be erased permanently and can not be recovered. IF YOU WANT TO INCREASE REMOTE RECEPTION RANGE UP TO 250 METERS, YOU CAN USE THIS 433

Loading offers ...